Yep, EU as usual having reasonable and well-thought out laws, give the US about 5 more years and they’ll make it law here too.

Because there are laws that specify when the brake light has to come on, and it isn’t when the car shows down (slightly).

To be clear, the laws say when it must illuminate. They do not (in the US) prevent illuminating it for other reasons in any way. The law says the light must illuminate/burn if you are actively pressing the brake pedal, but does not prevent it from also illuminating if a certain amount of regenerative braking is applied or a deceleration is detected. Theoretically an automaker could get away with making the brake lights simply always illuminate (and that loophole would be fixed in days, so no one does it).

Got a source for that?

So they progressively increase closing force if it keeps detecting something but the owner keeps trying to close it. I can vaguely see the reasoning only if they aren’t confident in the frunk sensor for some reason. I mean garage doors solved this problem forever ago without having to resort to something like that.

I wonder if the “vision-based everything” mandate from Musk applies outside of autonomous driving features? Makes sense to not be confident in it if it’s just a camera…

Gunpowder itself isn’t particularly strong as far as explosives go. Like you can probably make a bomb with enough of it packed tightly but you’re better off with dynamite.

Pretty sure the time is just edited, unless there’s some way to tell Google “Yes have me circle this roundabout a bazillion times”

To be fair, in that specific case it is almost certainly not YouTube directly censoring the phrase. They aren’t known to do any kind of editing like that on uploaded videos.

What is happening is the person that uploaded that video censored themselves…because YouTube’s policy around monetization. They’ll demonetize videos with certain no-no words. Part of that is YouTube and part of that is advertisers demanding their ads not be placed on content that they find objectionable.

Indirectly, YouTube and advertisers are censoring our content. A lot of it is also TikTok, which will ban you for no-no words. This seeps over into YouTube where something that might be fine on YouTube but is banned on TikTok gets censored anyway in case it gets clipped for TikTok.

Genuinely the power TikTok and it’s advertisers have over how we communicate is pretty scary. Imagine how often you hear “unalive” instead of “suicide” these days. “Pdf” (or others) instead of “pedophile.” The list goes on.

No one’s keeping you here.

It’s actually very difficult and expensive to leave your home country for 99% of the population.

Just in terms of cost you need a plane ticket (or other travel costs), money to navigate the country’s immigration programs and all the fees associated, you probably need to pay to learn a new language for a year or two before you’re fluent enough in that language (DuoLingo/self-learning has very mixed results), you need to pay for housing for when you arrive until you’re able to get a job. Realistically the ones fed up with our society are the ones living paycheck to paycheck, do you think they can shoulder those costs?

This is all assuming they even let you in, most developed countries won’t unless you have an in-demand skillset and/or a job already lined up in the country of question (i.e., the type of jobs that are doing well here already). And often times even if you have valid reasons and a job lined up they can still just tell you to go fuck yourself.

Add on top of that that if you somehow get that far, get past all of that, you’re giving away your right to vote in your new society for several years due to requirements to become a naturalized citizen.

Makes a lot more sense to try to improve your own country and local society when you consider all of those factors. “Don’t like America then leave” is something only the privileged that can hop on a jet to a new country at a moment’s notice think is a valid suggestion. At best it’s shit advice and at worst it’s a bad faith argument to push aside any and all criticism of the current system.

Why would Amazon want to hinder the accuracy of the price tracking in that way?

Accurate price tracking leads to people saying “Oh well it was 50% less a year ago. I’ll wait on a sale, not paying full price on that” and waiting on a sale, leading to less conversions. Amazon has pressured Camelcamelcamel into agreeing to not track specific low prices (i.e., Prime Day, if that actually had any good sales). I’m unsure if they track coupons or not, they were not clear about what the criteria for not tracking a price are.

Camelcamelcamel is unfortunately compromised by Amazon, it’s probably mostly accurate but there are price points they do not accurately log at Amazon’s request.

Took one for the team and tried it

Painfully sweet even for a Coca Cola product. Reminds me of Jolly Ranchers and/or Swedish Fish but not in a good way (and I love Swedish Fish)

0/10

7/10 with rice

I own the Sovol SV06, it was my first printer but it was also the cheapest option for me ($169 IIRC). The Sovol has given me two problems in the entire time I used it:

1. When it came in, the extruder was jammed. Wouldn’t print or extrude any filament for some reason. Followed a 2 minute video on Sovol’s Amazon page to resolve it (although it did involve disassembling the hotend).

2. The extruder decided to encase itself in plastic one day when I printed something on it. That was a bitch and a half to clean, had to take a heat gun to it to soften the plastic then scrape it off without burning myself. My best guess is it was caused by me forgetting to run bed leveling after moving the printer a bit, hasn’t happened again.

Other than those two times it just works every time I need it. It was sitting dormant for ~3 months and I just kicked off a print yesterday, no problems. Fired right up and everything printed perfectly.

With that said, is it €239 of “Just works”? Probably not. I immediately couldn’t do some prints I planned because of the build volume (although all three of your options have the same build volume). So I’m already considering upgrading to an SV06 Plus. So check some of what you want to print that it’ll fit in 220x220x250.

I did some research on your other options and as far as I can tell, the main difference between them and the Sovol is the all metal hotend and print speed.

Sovol SV06 has an all-metal hotend so you can print high temperature filaments (PETG/TPE/CFN/etc) without worry (does require a harder nozzle most likely though). The other two seem to have some metal but are not fully metal, so if you want to hop into the more exotic materials you’ll have to upgrade those.

Second is speed, my SV06 prints at 80 mm/s. It is slow. Smallest prints take around 2-3 hours. My current print will be done after 24 hours. This is fine for me as most of my prints need complex geometry, so I’d rather it take longer and be accurate than run it too fast. The others claim a max speed of 250mm/s which would be a bit over 3x faster than the Sovol. If they can actually print at that speed without looking awful, that’s a pretty big upgrade time-wise.

If you need exotic filaments and don’t want to upgrade the hotend yourself for it then consider the Sovol. Other than that, the price in your region makes it not an option in my opinion. The Sovol just is a budget printer, only makes sense at budget prices. The Kobra and Ended you mentioned look very similar other than that, they both have auto bed leveling (a must have), same build size, very similar designs. Personally I’d lean towards the Ender, just for the community support. But do some research and see how many community member posts you see online resolved with the two. They seem to be functionally identical to me otherwise (just looking at a spec sheet, I do not have irl experience with either of these printers)

Last time this came up, just spoofing the Firefox user agent to Chrome made it work perfectly. Maybe they block it because they haven’t tested it on Firefox yet, but it works as well as it does in Chrome.

And if they haven’t had the time to validate it in Firefox yet, that is a conscious choice by MS to not dedicate time specifically to validating in Firefox and treating it as a second-class web browser.

Note that isn’t illegal, it just means the company doesn’t get to get out of paying unemployment when it happens. And that’s only if someone is willing to challenge them on it.

Don’t listen to what he said… But SD cards are generally not very reliable. They might be fine they might die on you silently after a week.

Higher quality ones are better of course, but the quality of flash in SD cards varies wildly. I wouldn’t store anything on an SD card that I don’t already have a second copy of somewhere. (If I want to preserve it and it would cause problems for me to lose it)

This is a pretty big overstatement.

DO NOT USE AN SSD to store your data long-term! Solid-state storage has a very short, finite life-span.

This has not been true for years. SSDs are generally more reliable than HDDs except in write-intensive applications (and even then… It really depends on what exact models you are comparing). SSDs have a life-span mostly talked about in terms of TBW (terabytes written) rather than years for a reason, if they’re powered on and not written too they’ll last as long as or longer than a hard drive. (Note: Powered on regularly, SSDs can lose data if stored unpowered for a long time (months)). If you just have an archival drive you’re not constantly erasing and rewriting data to, an SSD is a great choice. Reads also barely affect the lifespan of at all, so you can still access the data you want to protect (hell, write-lock the drive even and it’ll last decades if powered on).

What you want to do is buy an even number of hard drives, plug them in long enough to copy your data to, and then unplug them and store them in a climate-controlled area. bout once a year, copy the data to a different hard drive

This is just plain silly. Yes, the mechanical wear of the drives spinning up and down means they’ll die faster. But we’re still talking MTBF measured in years. And replacing a hard drive that’s barely used every single year? That’s not just bad advice it’s creating e-waste for no reason. Also note drives fail on a bathtub curve… If you have two good drives that lasted a year, you are increasing your chances of a failure by swapping them for two brand new drives… The best thing you can do for your hard drives is to not power cycle them constantly, any typical usage is fine. Also mechanical parts can actually wear out from disuse as well. Even archival services don’t go to these extremes you’re recommending.

If you really care about saving your data follow 3-2-1. 3 copies of your data (live, archival (external HDD or similar), off-site), two-different forms of media (HDD, SSD, cloud (yes cloud is an HDD or SSD but they have their own redundancy)), one off-site (in the event of a fire etc.)

Honestly 99.9% of consumers would be fine with a 2-2-1 scheme, 2 copies (live and off-site/cloud), 2 forms of media, 1 off-site. If you don’t trust Google or don’t want to pay for cloud storage, set up a server with redundant disks at a friend’s house. Just keeping a second copy on a server with redundancy is plenty of fail over for most use cases. 3-2-1 is for data centers and businesses (and any cloud service you rent from will follow 3-2-1…) Let’s not overcomplicate how difficult it is to keep data intact, if I tell someone to buy a new 12tb HDD each year they’re just gonna give up on keeping it safe.

The not-so-quiet part here is “Homeless or poor people don’t deserve to have their basic need of a toilet met”

They call it a “need” but proudly talk about how they’re taking it away from the less fortunate.

Conveniently I work in this space, but note the following is primarily my own personal opinion.

Primarily there’s a few reasons I prefer Android Auto over native Android on the car:

1. Ever had a phone that’s a few years old slow down in you? Now imagine you buy a car for $60k, and three years down the line the (already sluggish to begin with) Android interface is bogged down by updates and is barely usable. Imagine Spotify drops support for that version of Android Automotive. Android Auto puts all the infotainment into something the customer controls, and something external to the car so you are not dependent upon the OEM to do their own due diligence to ensure functionality and compatibility. If my phone slows down from age/wear/increased software demands, I go buy a new $400 phone. If my car’s infotainment slows down I…buy a new car? (Looking at you GM)

2. Like I said it moves the infotainment to something in the customer’s (and Google/Apple’s) hand. OEMs do not want this. Auto makers want you locked into their proprietary Android skins for two reasons. First, making it more difficult to leave their specific company’s ecosystem. They (will) build in their own apps that you’ll start putting all your settings and private info on. Things like remembering a driver’s preferred seating and mirror arrangement and auto-adjusting, so when your spouse buys a car you go “Oh well if we both have brand X, it’ll be easier to drive each other’s cars.” Etc. Second, they want all of your data. Legitimately the industry is on fire right now figuring out how much consumer data we can scrape and use/sell with these systems. The Android Automotive stack in a car is 300% sending data back to the OEM of literally anything they are legally allowed to collect. Probably more, too. Plug in Android Auto from my phone and yeah they’re still spying on me, but they don’t have my Spotify login info or my specific apps used, they just have what the vehicle can directly measure (still a terrifying amount).

In your specific case with a third party head unit…go ham and use the stock interface if you want. Personally I’d still use Android Auto, to top off my phone and to access my local music library (I don’t stream music), but a third party has a lot less interest in spying on you or locking you in the same way an OEM does.

Also out of curiosity, what head unit did you get? I’ve got a 2012 Cruze I’ve considered installing one of those on but I can almost never find anything that seems actually trustworthy.

you get more cheese for the same money.

Everyone says this, but everywhere I’ve gone shredded cheese costs exactly the same per ounce.

Although I prefer bricks since they last longer and I live alone. Shredded cheese goes bad it feels like immediately after you open it.

I read this in Timmy’s voice, to the point I had to double-check this wasn’t a quote.

https://www.youtube.com/watch?v=7tyt0FYTNUg

makes it appear negative that they don’t see what’s going on with their money. I I interpreted that as them being ignorant of what happens with their money

To be clear, the meme is that PayPal shows the users’ dead names (presumably because the account was set up prior to their transition/legal reasons)

The “I do not see it” is referencing “not seeing” the dead names in the transaction details.